VEC431
4
Using the External Antenna
The External Antenna is used to enhance reception in areas
where the audio signal is weak. It can be easily repositioned as
needed if audio signal strength changes during travel.
Plug the Antenna’s barrel connector into the External Antenna
Port on the Dock and screw either the suction cup or clip into the
wing antenna end. Attach the wing antenna end:
• to the lower passenger side front window (or other flat surface
location near the vehicle antenna) using the supplied suction
cup, or
• to the sun visor, dashboard, air vents, etc. using the supplied
clip.
CAUTIONS
Position the External Antenna so that it will not
become tangled, crimped or damaged; and make
sure it does not impede the driver’s access to vehicle
controls (turn signals, etc.) or visibility.
NEVER position the External Antenna in front of an
air bag.
SPECIFICATIONS
Power supply:
12 volts DC
Consumption Electric Current:
100 mA
Range of the frequency:
From 88.1 to 107.9 MHz
Operating Distance:
7 meters (max.)
FM Audio Transmitter
Charging Dock
for iPod
®
USER’S MANUAL
& WARRANTY INFORMATION
IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.
www.vectormfg.com
4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312
Toll Free: (866) 584-5504
ANTENNA
SUCTION CUP
ANTENNA CLIP
iPod is a registered trademark of Apple Computer, Inc. Vector Manufacturing is not associated with or otherwise affiliated with
Apple Computer, Inc.
VEC431_Manual_080505 8/5/05 5:10 PM Page 4
