89
APPENDIX
manager using the IP address assigned to the operating system,
such as Net-SNMP manager, you can simply use the SNMP
function on the ArcHttp proxy server utility. To enable the RAID
controller SNMP traps sending function, configure the “SNMP
Traps Configuration” options on the "ArcHTTP Configurations".
The Archttp proxy only provides one direction to send the trap to
the SNMP manager without needing to install the SNMP extension
agent on the host. For detailed information on using Archttp proxy
server utility to send the SNMP traps, please see "SNMP Traps
Configuration" section on chapter 3 "Archttp Configuration".
If SNMP manager requests to query the SNMP information from
RAID controller, please refer the C-3-2 section "Using Onboard
NIC”.
C-3-2 Using Onboard NIC Installation
With the built-in LAN port, you can add SNMP function onto your
the RAID storage. You can use the browser-based manager to
setup the firmware-based SNMP configuration. To launch the
browser-based RAID controller SNMP function, click on the “Sys-
tem Controls” link. The “System Controls” menu will show avail-
able items. Select the “SNMP Configuration” item. The follow-
ing screen is the firmware-embedded SNMP configuration setup
screen using browser-based manager:
