THUNDER TIGER RAPTOR 30, Руководство по сборке и обслуживанию

Страница: 34 / 50

32
In the event the model has crashed.
Changing the main rotor shaft:
(1) Disconnect the control rods to the washout arms.
(5) Hold on to the plastic main gear pull the 10mm and
(1)
(2)
(3)
(1)
(2)
(3)
Inspect the flybar, rotor shaft and the blade spindle to make sure they are not bent at all. If any item is
damaged, it must be replaced with a new part to ensure safe operation. Do not glue any broken or damaged
plastic part. Do not repair broken rotor blades. Always inspect the following items immediately:
Engine starting shaft.
All the gears.
Main shaft, flybar and blade spindle.
Tail boom and support.
Vertical and horizontal fins.
Tail rotor shaft and control system.
Main and tail rotor blades.
Changing the blade feathering spindle:
(1) Disconnect the linkage rods to the blade grips.
(2) Remove the 4mmx8 bolt.
(3) Pull out the blade grips gently.
(3)
(1)
(2)
(1)
(2)
(3)
(1)
(2)
(3)
(3) Loosen the set screws on the collar.
(2) Disconnect the washout link to the swashplate.
main rotor shaft upward.
(4) (4)
(4) Remove the 3mm x 20 bolt.