ThoroughClean D10i-36C, Руководство оператора, Страница: 9 / 30

PERIOD OF USE Suction/Delivery HP Outlet Valves
Worn
Check – Replace Therefore Check suction Filters
Unloader Valve Worn Replace as required
Piston Seals Worn Replace as required Check Big Ends for Piston Slap
Piston Cracked Replace as required Check Big Ends for Piston Slap
”O” Rings Failed/Leaking Replace as required
”Big End” Worn Replace as required
Drive Belts Loose (if belt driven) Check / Tighten
PUMP VERY
“NOISY”
Air in Suction / Pump Cavitating Identify Air Ingress/Seal
Problem with pump-motor
connection
Check gearbox or coupling
Broken or Weak Suction Valve
Spring
Check – Replace – As Set
Valves Clogged/Sticking Check – Replace – As Set
Worn Main Crankshaft Bearings Probably Uneconomical to
Repair
Inlet Water Temp over 75 deg
Celsius
Reduce inlet Water Temp Left in By-Pass for excessively
long periods?
OIL IN PUMP
EMULSIFIED/
CONTAMINATED
BY WATER
(water in the
oil)
Piston to Crankcase Oil Seals Worn Check and Replace Look for Oil under Pump – Low
Pump Oil
Condensation from High Ambient
Humidity
Replace oil more frequently
Piston Seals Worn/Cracked Piston Check – Replace
Water Blasted into Pump via
Breather Cap during Cleaning
Exercise Care
WATER
DRIPPING FROM
UNDER PUMP
(Between
crankcase and
manifold
housing)
H.P. Piston Seals Worn or Check and Replace Seal Pack
Worn Plunger Replace Plunger
Worn Plunger Stop Seal Replace Seal
“O” Rings in Plunger Retaining Bolt
Worn
Check and Replace
OIL DRIPPING
FROM UNDER
PUMP
(Between
crankcase and
manifold
housing)
Piston to Crankcase (Plunger Shaft)
Oil Seals Worn
Check and Replace Check Pump for Low Oil
therefore “Big End” Damage
EXCESSIVE
VIBRATION/
PULSATIONS IN
HP DELIVERY
LINE
Accumulator Failed Check – Replace
Worn Seals (Wet end seals) Replace if worn
Worn Plunger Seals Replace if worn
In/Out Pump Valves Worn Check – Replace
Valves full of scale/dirt Clean or replace
Pistons Cracked Check – Replace
Low Water Supply Increase supply
Gudgeon Pin in Conrod Stretched Check – Replace
WATER FILTER
MESH IS
CRUSHED WHEN
REPLACED
Incorrect replacement procedure
on Grey NY126 Water Filters with
Blue or Red mesh tube
First insert mesh tube tightly into
the fixed black head of filter
assembly and then screw on grey
cover /cup tightly.
For small black filters, first
insert mesh tube into cover
/cup and then screw onto
fixed part.
9