THORLABS TED8020 Скачать руководство пользователя страница 32

Страница: 32 / 83

1.8 Optimization of temperature control

Temperature module TED8xxx / page 25

P-share

•

Change repeatedly between set temperatures of 18 °C and 22 °C while observing

the settling behavior of the actual temperature.

Increase the P-share gradually. Higher values will increase the settling speed, to

high values make the system oscillate.

The P-share has been set correctly when the actual temperature remains stable

near the set temperature after only 2-3 overshoots.

D-share

•

Change repeatedly between set temperatures of 18 °C and 22 °C while observing

again the settling behavior of the actual temperature.

Increase the D-share gradually. Higher values will decrease the amplitude of the

overshoots.

The D-share is set correctly when the actual temperature remains stable

near the set temperature after a minimum of overshoots.

I-share

•

Turn on the I-share again.

•

Again change repeatedly between set temperatures of 18 °C and 22 °C.

Increase the I-share gradually. Higher values will accelerate the settling to the set

temperature.

The I-share is set correctly when the actual temperature reaches the set

temperature in shortest time without overshoots.

Содержание TED8020



















































































Результаты поиска

Содержание TED8020

Отзывы:

THORLABS TED8020, Руководство по эксплуатации, Страница: 32 / 83

Результаты поиска

Содержание TED8020

Отзывы: