THORLABS S4FC Series, Руководство пользователя

Страница: 4 / 27

S4FC Series Fiber Coupled Laser Source Chapter 2: Safety
Page 2 TTN051387-D02
Chapter 2 Safety
SHOCK WARNING
High voltage inside. To avoid electrical shock, before powering unit, make sure that the protective
conductor of the 3-conductor power cord is correctly connected to the protective earth contact of the
socket outlet. Improper grounding can cause electric shock resulting in severe injury or even death.
Do not operate without cover installed.
WARNING
This unit must not be operated in explosive environments. Do not operate in wet or damp conditions.
Do not obstruct the air-ventilation slots in the housing!
WARNING
Avoid Exposure – Laser Radiation Emitted from apertures.
WARNING
The unit is supplied with either a 115 V parallel blade line cord for North American use or a European
compatible 220 V line cord. For all other applications use an IEC 320 compatible line cord fitted with a
plug appropriate for your particular AC wall socket. Do not replace detachable mains lead with an
inferior cord. This may cause a failure, damage, shock, or injury. Changing of the mains fuse can be
done by the user, refer to section 7.3 on page 17 for proper fuse selection. With the exception of the
mains fuse and the connector (for cleaning), there are no user serviceable parts in this product.
Warning
Mobile telephones, cellular phones or other radio transmitters should not to be used within the range
of three meters of this unit since the electromagnetic field intensity may exceed the maximum allowed
disturbance values according to EN50082-1.
This device can only be returned when packed into the complete original packaging, including all packing inserts.
If necessary, ask for a replacement package.
The maximum USB and BNC cable length is 3 meters in order to avoid a susceptibility to RF interference
according to IEC61000-4-3.
Note: If equipment is used in a manner not specified by the manufacturer, the protection provided by the
equipment may be impaired.
Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to laser notice no. 50, dated 5/27/01.