THORLABS S4FC Series, Руководство пользователя

Страница: 13 / 27

S4FC Series Fiber Coupled Laser Source Chapter 5: Operation
October 24, 2017, Rev R Page 11
5.10. Computer Controlled Operation
5.10.1. GUI Operation
The S4FC series can be controlled by a GUI run from the supplied CD. In order to run the software from another
location, PC’s hard drive, thumb drive, etc., copy the files indicated below to the same directory on your storage
device.
Figure 4 File locations of GUI software
The necessary drivers can also be found and installed from the provided CD. After inserting the CD, the window
in Figure 5 will open.
Figure 5 Startup Screen
Selecting the Browse Manual button will open an electronic copy of this manual. Selecting the Install Driver button
will install the drivers necessary to communicate with the S4FC controller via USB 2.0. Pressing the Launch
Setting button will run the GUI user interface and open the window in Figure 6