background image

© 2016 Thorlabs GmbH

11 Warranty

25

MTD415T Data Sheet Rev. 1.0

11   Warranty

Thorlabs  GmbH  warrants  material  and  production  of  the  MTD415T  for  a  period  of  24  months
starting  with  the  date  of  shipment.  During  this  warranty  period  Thorlabs  GmbH  will  see  to
defaults by repair or by exchange if these are entitled to warranty. 

For warranty repairs or service the unit must be sent back to Thorlabs GmbH. The customer will
carry  the  shipping  costs  to  Thorlabs  GmbH,  in  case  of  warranty  repairs  Thorlabs  GmbH  will
carry the shipping costs back to the customer.

If no warranty repair is applicable the customer also has to carry the costs for back shipment.

In case of shipment from outside EU duties, taxes etc. which should arise have to be carried by
the customer.

Thorlabs GmbH warrants the hard- and/or software determined by Thorlabs GmbH for this unit
to  operate  fault-free  provided  that  they  are  handled  according  to  our  requirements.  However,
Thorlabs  GmbH  does  not  warrant  a  fault  free  and  uninterrupted  operation  of  the  unit,  of  the
software  or  firmware  for  special  applications  nor  this  instruction  manual  to  be  error  free.
Thorlabs GmbH is not liable for consequential damages.

Restriction of warranty

The warranty mentioned before does not cover errors and defects being the result of improper
treatment,  software  or  interface  not  supplied  by  us,  modification,  misuse  or  operation  outside
the defined ambient stated by us or unauthorized maintenance.

Further  claims  will  not  be  consented  to  and  will  not  be  acknowledged.  Thorlabs  GmbH  does
explicitly not warrant the usability or the economical use for certain cases of application. 

Thorlabs GmbH reserves the right to change this instruction manual or the technical data of the
described unit at any time. 

Содержание MTD415T































Отзывы: