THORLABS KDC101 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 80

THORLABS KDC101 Скачать руководство пользователя страница 8

8

HA0363T Rev D Jan 2017

Chapter 2

2.3.2

APTUser Utility

The APTUser application allows the user to interact with a number of APT hardware
control units connected to the host PC. This program displays multiple graphical
instrument panels to allow multiple APT units to be controlled simultaneously.

All basic operating parameters can be altered and, similarly, all operations (such as
motor moves) can be initiated. Settings and parameter changes can be saved and
loaded to allow multiple operating configurations to be created and easily applied.

For many users, the APTUser application provides all of the functionality necessary
to operate the APT hardware without the need to develop any further custom
software. For those who do need to further customize and automate usage of the K-
Cube DC Driver (e.g. to implement a positioning algorithm), this application illustrates
how the rich functionality provided by the APT ActiveX server is exposed by a client
application.

Use of the APT User utility is covered in the PC tutorial (Chapter 5) and in the
APTUser online help file, accessed via the F1 key when using the APTUser utility.

Caution

On start up, wait until the top panel POWER led is lit bright green before

running the APT software.

«
...
6
7
8
9
10
...
»

Содержание KDC101

















































































Отзывы:

Нет отзывов