THORLABS ITC5000, Руководство по эксплуатации

Страница: 53 / 54

5.3 List of possible status messages
ITC5000 / page 47
5.3 List of possible status messages
“Card
Missing” This status message shows if you have
established a connection between the
corresponding software module and a card and
then remove the card from the TXP.
“Critical Card Temperature reached” Informs about the temperature of the card
reaching its limit
“Supply Voltage Failed”
Internal error, please contact Thorlabs GmbH
“Global Interlock Open”
Close the global interlock line or put the short
circuit plug on the D-SUB jack at the rear panel
“Local Interlock Open”
The card interlock is open
“Laser Connection failed”
Connection to the laser diode is interrupted or
missing
“Laser Current Limit”
You have reached the set laser current limit
“Check Temperature Sensor”
The card did not find a temperature sensor
“Check TEC element”
Connection to the TEC interrupted
“Temperature not Stabilized”
Temperature not yet within the set window