THORLABS ITC5000, Руководство по эксплуатации

Страница: 17 / 54

1.5 Operating elements at the front of the card
ITC5000 / page 11
1.5 Operating elements at the front of the card
1.6 Installing and removing cards
The Thorlabs TXP series mainframes are ‘Hot-Plug capable’, that means you do not
have to switch off the mainframe while exchanging cards:
•
Loosen the two mounting screws on top and below the ejector handle
•
Push the red button of the ejector handle and flip down the black ejector
handle
This pulls out the card from its internal plug.
You can now remove the card. If you do not insert another card, please close the
empty slot with a blind module to maintain a proper cooling air flow inside of the unit.
Re-tighten the two screws.
Ejector handle
(Hot Plug Capability)
15-Pin D-SUB connector
for laser diode, monitor diode,
TEC and thermistor connection
Modulation input
LED’s for:
•
Module selected
• Laser Current ON
• TEC Current ON
• Error occurred
Mounting screw
Mounting screw