THORLABS EDU-OMC1, Руководство пользователя

Страница: 31 / 60

Optical Microscopy Course Kit Chapter 5: Setup and Adjustment
Rev C, October 1, 2020 Page 27
4. Repeat steps 2 and 3 with ND10B, ND13B, ND20B and ND30B filter subsequently in this order and label
them accordingly. Metallized sides of all filters should face the same direction.
5.
Add the label “Open” to the remaining filter wheel optic mount (the one with no filter installed).
6. Attach the 1/4"-20 (M6) setscrew
[1/2” (12 mm) long] to one of the central mounting holes.
7. Attach the TR3 (TR75/M) post with the 1/4"-20 (M6) threaded side to it and remove the 8-32 (M4) setscrew
from the other end of the post.
a. When securing the post, DO NOT use the filter wheel for leverage. Rather, put a driver through
the 6 mm rail hole on the filter wheel body, and another through the cross-drilled hole in the post,
and use these for leverage.
8. Place the mount into the benchtop organizer for storage.