THOR3D Calibry, Руководство пользователя

Страница: 37 / 74

Finalization
At the finalization stage, the cloud of points is converted into a polygonal model. In
this case, it is necessary to specify certain algorithm settings.
In the top of the window you can select an array of preset settings de-
pending on the scanner model and the scanned object. You can also cre-
ate your own array of the most frequently used settings.
Resolution. This parameter determines the size of the face of elementary
polygons (triangles) which will constitute a polygonal model. The smaller the
size of an elementary polygon, the more detailed a model is. However, in-
creasing the level of detail results in an increase of algorithm run time.
When Resolution parameter values are equal to or less than 1mm an algo-
rithm requires more raw data which is achieved by increasing the period
of object scanning time. If there is not enough raw data, this can lead to
paradoxical results. Despite the specified high level of detail and long al-
gorithm run time, the obtained surface will be uneven.
!
!
3D scanner
35