THOR3D Calibry, Руководство пользователя

Страница: 22 / 74

Calibration of the scanner
Scanner
operation
The scanner needs to be aligned in three
directions:
1. Find a suitable distance to the calibration
board by moving the scanner stand towards
it or away from it. The indicator on the left
side of the screen shows when the device is
at the required distance.
2. Rotate the scanner a few degrees left and
right until the smaller of the two red circles
aligns with the black circle of the same size.
3. Move the scanner stand slightly to the left
and right until the large red circle aligns with
the black circle of the same size.
As soon as the desired position is found, the
scanner will display the message «Freeze»,
and the red circles will become blue. Do not
move the scanner during this time. It will take
2−3 seconds. Once the position is recorded,
the screen will display the message about
transition in the second position.
20