Thor Motor Coach Class C, Руководство пользователя

Страница: 48 / 97

Thor MoTor CoaCh
CoNTroLS aND oPEraTIoNS
47
Euro recline With ottoman
To recline, sit down, grasp the armrest’s and lean back to recline. Since a seat belt is not provided, do not use
the euro recliner while in transit.
Dinette
Booth
The dinette will seat four people. Storage and/or various systems components can be accessed from above
by removing the seat cushions and lifting the seat supports.
Free Standing
Since the free standing dinette chairs are not secured to the floor, and not equipped with seat belts, they should
not be occupied while the motor home is in motion. These chairs should be stored securely while the vehicle
is in motion.
Pedestal
The dinette can also be converted into an additional bed if required. To convert, lift the table top off of the two
support posts. Remove the support posts from the floor and lay them down between the seats. Insert the table
top between the seats on the ledges provided. Loosen the seat cushion from the Velcro fasteners and slide
each together to form the bed. Reverse this process when reconverting to the dinette configuration.
Wall Mounted
This dinette can also be converted into an additional bed. Lift the aisle side of the table and pinch in the pins on
the table leg to collapse the leg. Unhook from side wall and swing into place. The table supports on the dinette
base. Loosen the seat cushion from the Velcro fasteners and slide each together to form the bed. Reverse this
process when reconverting to the dinette configuration.
Lounge Table
This table is stored in a folded position next to the barrel chair. To raise for use, pull out on the bottom to release
it from its securing catch, and swing up. When raised, reach under the table and swing the supporting leg down
until it locks into position. Adjust the length of the support leg, so that the table will be level when resting on it.
To adjust the support leg length, pull back on the spring clip, releasing the detent from the adjustment hole it
is presently in. While holding the spring clip back, slide the leg to the desired length, then release the spring,
allowing the detent to lock into the new hole.
To fold back for storage, reverse the previous procedure; shortening the support leg, and folding the leg up
against the bottom of the table top. Lower the table top, and push in on the bottom to secure it into the catch
that keeps the table from moving while traveling.
Pilot and Co-Pilot Seats
PILoT aND Co-PILoT SEaTS MUST BE LoCKED IN a ForWarD FaCING
PoSITIoN WITh SEaT BELTS FaSTENED WhILE ThE MoTor hoME IS IN
MoTIoN. avoid seat rotation while in transit.
reclining Back
A control lever on the left or right side of seat controls the angle of the back rest. Lift up on the lever, lean back to
position seat and then release the lever to lock the back rest in place. To return the backrest to upright position,
lift up on the control lever. It will automatically return to its normal upright position. To prevent damage, be
sure to return the seat back to it's upright position before operating the slide out rooms.
Seat Swivel
A control lever on the side of seat controls the swivel function. Push the lever forward to release the detent on
the swing mechanism. Once the lock is released, the seat may be rotated either left or right.
Forward and Back adjustment
The forward and back sliding action is controlled by a lever on the lower left side of the seat. To adjust, pull the
lever outward to release the latch, and slide the seat to the desired position. Make sure the seat locks into the
position you have selected.
arm rests
Arm rests can be rotated up and out of the way when not required.