Thor Motor Coach Class C, Руководство пользователя

Страница: 36 / 97

Thor MoTor CoaCh
CoNTroLS aND oPEraTIoNS
35
MaKE SUrE To ChECK ThE MIrrorS WhEN DrIVING aND BaCKING, For a
MorE CoMPLETE FIELD oF VISIoN. The camera is equipped with a wide angle
lens that can initially present an image that may be deceiving. Make sure to
practice backing in a safe place, using the monitor to become accustom to it’s
operation.
Camera operation
Power Switch:
The power button has two settings, Stand-by and ON. When in the stand-by mode the monitor operates
when the recreation vehicle transmission is switched into Reverse. When in the ON mode the monitor system
operates when the ignition switch is in the ON position.
Note: The unit will not turn ON when the hazard lights are activated.
Ca SEL (Camera Select Button):
This button is used with the optional side view camera system. Use the button to toggle through the multiple
camera views.
Day/Night Mode Button:
Pre-set brightness and contrast levels optimized for day or night operation.
Contrast & Brightness:
Variable controls of contrast and brightness. Should be adjusted if the DAY/NIGHT switch does not achieve
the most desirable picture.
Volume:
Variable control of internal speaker volume.
DASH RADIO
The dash radio will control the multi-functions for the dash audio system. Basic Operations are listed below.
For complete information, consult your owner's manual provided. Satellite-Ready means that the in-dash radio
will work with a satellite radio tuner.
PoWEr oN / oFF:
Press the Volume/Power button (1) to turn the unit ON and OFF.
VoLUME CoNTroL:
To increase the volume, rotate the volume control (1) clockwise. To decrease the volume, rotate the volume
control counter clockwise.
MUTE:
Press the MUTE button (6) on the control panel to mute the audio output. Mute will appear on the LCD display.
Press MUTE again to restore the audio
output to the previous level.
AUDIO:
Press the AUDIO button (4) to access
Audio Mode and select a source for
playback. You may press and hold
the AUDIO button to enter the “Audio
Setup” menu.