Thor Motor Coach Class C, Руководство пользователя

Страница: 39 / 97

Thor MoTor CoaCh
CoNTroLS aND oPEraTIoNS
38
automatic Leveling and retraction Procedure
MaKE SUrE ThErE arE No oBSTrUCTIoNS IN ThE EXTEND or rETraCT
PaThS oF ThE JaCKS. KEEP aLL PEoPLE CLEar oF ThE VEhICLE WhILE
oPEraTING ThE LEVELING SYSTEM.
Do not allow excessive motion in the motor home during the Auto-Level operation. This could cause the system
to level improperly.
1. TUrN oN PoWEr . The power to the unit must be turned on. You need to have the ignition
key in the
oN
position and the parking brake must be set to turn the control panel on. Push
the POWER touch pad to engage power. The power touch pad should be lit when power is
on.
2.. PrESS ThE aUTo-LEVEL ToUCh PaD. The system will automatically level your
vehicle. The control panel will send out a series of beeps to let you know that
AUTO-LEVEL is operating. When completed, the panel will signal a successful Auto Level.
After ten minutes, the panel will enter sleep mode.
3. rETraCTING ThE JaCKS. Your Lippert System provides you with the ability to retract
the jacks using the Retract All Jack Button feature. Press and retract the Retract All
Jacks Button. All jacks will automatically retract. The jacks are retracted when the Jacks
Down light has gone out. Depending on the vehicle, full retraction may take up to 90 seconds.
Note: Zero point, or level position has been preset at the factory. However, if you want
to change the setting refer to the automatic hydraulic levelers owner's manual for
detailed information regarding the proper procedures to do this.
TUrN oN PoWEr PrESS aUTo-LEVEL ToUCh PaD rETraCTING ThE JaCKS
CAUTION