Thor Motor Coach Class C, Руководство пользователя

Страница: 42 / 97

Thor MoTor CoaCh
CoNTroLS aND oPEraTIoNS
41
SLIDE OUTS
Refer To The Manufacturer’s Operation’s Manual For Complete Details And Troubleshooting Guide.
Electric Slide out
Keep people and obstructions clear of room when operating.
operating the room with any room locking devices in place can cause personal injury and vehicle
damage. It is the operator’s responsibility to ensure that all room locking devices (if equipped) are
disengaged before operating the room.
THE MOTOR HOME MUST BE LEVEL BEFORE EXTENDING THE SLIDE OUT
ROOM(S). FAILURE TO DO SO MAY RESULT IN STRUCTURAL DAMAGE TO THE
MOTOR HOME OR WATER INTRUSION.
BEForE EXTENDING or rETraCTING SLIDE oUT rooM : Be sure that the
driver’s seat is in the forward position and the seat-back is straight up. Slide out room
will contact chair if chair is improperly positioned.
To Extend Slide out
Note:
Make sure that there is adequate clearance to fully extend the room.
1. Apply the parking brake
2. Make sure ignition is in OFF position.
3. To extend the room, press and hold the ROOM CONTROL SWITCH in the “OUT” position.
When the room is fully extended, release the ROOM CONTROL SWITCH.
Note: Releasing the ROOM CONTROL SWITCH will halt the operation of the room.
To retract Slide out
1. Make sure to clear any obstruction in the slide-out area, and set the parking brake.
2. To retract the room, press and hold the ROOM CONTROL SWITCH in the “IN” position.
When the room is fully retracted, release the ROOM CONTROL SWITCH.
3. Install the room locking devices if equipped.
4. If the room will not retract, refer to the “Manual Retract Procedure”.
Electric Slide out - Manual room retraction Procedure
Note: Please consult Thor Motor Coach for information regarding this procedure.
NOTICE
CAUTION