P26
TechnicAL sPecificATions
Problem
Possible cause
What to do
After moving the receiver
to another room/area
you are no longer able to
receive digital reception
Antenna signals are too
weak
The signal strength/
quality might be less
than before, if using an
indoor antenna.
Press the
info
button
on remote 3x to call up
signal bars and adjust
antenna for (maximum)
reception
or rescan channels
When using an active
antenna, check antenna
power.
Try to use an outdoor
antenna.
The receiver switches off
automatically.
Auto Standby function
enabled.
Disable auto standby.
See section
7.3.7
for
details.
Playback of video (or
Timeshift) is causing
picture freeze/macro
blocks or similar
distortion, especially on
HD content.
Read/write speed of your
USB device could be
too low.
Make sure to use a USB
storage device with
sufficient speed and
space. Pen drives (‘USB
sticks’) may not support
sufficient speed.
9.0 TechnicAL sPecificATions
Demodulator
Demodulator:
QSPK, 16/64/256 QAM
DVB-T (EN 300 744), DVB-T2 (EN 302 755)
Transmission mode:
1K, 2K, 4K; 8K, 16К, 32К
Guard intervals:
DVB-T = 1/32, 1/16, 1/8, 1/4;
DVB-T2 = 1/128, 1/32, 1/16, 19/256, 1/8, 19/128, 1/4
video Decoder
Profile level:
MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC
Video resolutions:
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / By
Native TV /By source
Decoding & Video out:
PAL
Aspect ratio:
4:3 Letterbox, 4:3 Pan & Scan, 16:9, Auto
Audio Decoder
Audio support:
AAC/Dolby® Digital Plus*/AC3+/PCM