STARTING UP FOR THE FIRST TIME
P9
En
g
lis
h
noTe:
Timeshift/recording and playback only works properly when a
fast USB storage device such as a USB2.0 HDD is connected to
the receiver. Timeshift/recording and playback of HD content
requires a sufficient read/write speed of the used USB storage
device.
4.0 sTArTinG uP for The firsT TiMe
When you use your receiver for the first time, please select your menu language using
pq
and press
ok
to confirm selection. You will follow to the Welcome “Easy install”
menu. Use
pq
to move the highlight to the setting you wish to alter and use
tu
to
change values. Highlight
ok
and confirm all selections.
Region
:
Select your region where this receiver is used.
Subtitle
:
Select
Normal
to display subtitles per default, Select
Hard of
Hearing
to show HoH subtitles per default. Select
Off
to hide
subtitles per default.*
Aspect Mode
:
Use this option to select the aspect ratio of your TV and the
preferred conversion method. Options are:
Auto
(automatic
detection of aspect ratio),
4:3 Panscan
(Displays 16:9
widescreen broadcasts full screen on your 4:3 TV),
4:3 letterbox
(black bars on top and under the picture on a 4:3 TV) and
16:9
(use this setting for 16:9 TV sets).
Scan mode
:
Select
All
to store scrambled and free to air channels or
select
Free
to store only free to air channels. Note: Scrambled
channels cannot be viewed with this receiver.
Connection
:
Use this option to adjust the established connection to your
TV set. Select
HDMI
or
TV SCART
.
*Availability of DVB/HoH subtitles depends on the broadcast. If such subtitles are not supported, then most likely
subtitles can be activated via Teletext if available.
When all settings have been made, move the highlight to
OK
and press
ok
to continue.
noTe:
Wrong region selection can lead to missing channels or
channels being stored at wrong positions in the channel list.
The receiver will now advance to the
Aerial Adjustment
screen.
This part of the wizard is of great help when setting up your antenna system.
Use
pq
to move the highlight to the setting you wish to alter and use
tu
to change
values. The following settings are available:
Antenna Power
:
Set to
On
if you use an active antenna. When set to
On
, 5 V will
be present at the ANT IN connector of the receiver. Select
Off
for passive antennas.
