P6
Your receiver
4.
hDMi
To connect your receiver with your TV set using an HDMI
cable.
5.
Tv scArT
To connect your receiver with your TV set using a SCART
cable.
6.
Power cord
Your receiver requires a supply voltage of 220~240V AC
(Auto-selectable), 50/60Hz ±5%. Please ensure the local power
specification meets these requirements before connecting
your receiver to the wall outlet.
2.4 remote control
Fig. 3
1.
q
Switches the receiver On/Standby
2.
!
Mutes all audio outputs of the receiver
3.
PG+/PG-
Page up/down in all list modes
4.
DTv/vcr
No function
5.
info
Opens the current channel information; 2x opens the current
event information and 3x the signal information
6.
voL+/voL-
Increases/decreases the volume level
7.
Menu
Opens the main menu, in a menu you will get one step back
8.
eXiT
Exits from the menu or sub-menu
9.
pq
Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
10.
tu
Menu Off: Increases/decreases the volume level.
Menu On: Change settings for specific menus
11.
ok
Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
12.
recorD
Records the TV programme to the connected USB storage
device
13.
TiMeshifT
Activates the Timeshift function (Off/On)
14.
0~9
Enters a channel number in viewing mode or a value inside
the respective menu
15.
ePG
Opens the EPG (Electronic Programme Guide) in TV mode
16.
recALL
Back to previously watched channel
17.
AuDio
Opens the audio language selection
18.
Tv/rADio
Toggles between TV or RADIO mode
19.
fAv
Opens the favourite group selection
20.
fiLe
Opens the Media Player list
21.
TTX
Displays Teletext on the OSD (On Screen Display)
22.
subTiTLe
Shows a list of subtitle languages
23.
5 6
Fast rewind/fast forward
