16
To exit from a menu, press either
to go back one step, or
MENU
to go directly to TV mode. When
you exit the menu by
/
MENU
, you will be asked to confirm the changes. This is applicable for all
changes you made.
NOTE:
The
simpliTV list
contains channels in the sequence and numbering of the
broadcaster. Added/additional channels which are not included in the list
are listed from channel number 400 and cannot be edited. The channels
can be edited in
My TV List
, see chapter
7.2.1 TV Channel Manager
7.2.2 Radio Channel Manager
Please refer to the previous chapter
TV Channel Manager
to find out how it works in radio mode.
The only difference is that no picture is available.
7.2.3 EPG (Electronic Programme Guide)
For details on the EPG please refer to chapter
6.7 EPG (Electronic Programme Guide)
.
7.2.4 Parental Control
In this menu, you can make a
PIN-Code Change
, set a
Menu lock
and
Program Lock Age
.
To enter this menu, you need to enter the PIN-Code (
DEFAULT
PIN
:
0000
) first. Use the
pq
buttons
to select the desired setting or press
OK
to list the options. Use the
t
u
buttons to change the
setting.
Menu lock
:
Use
t
u
to select
ON
or
OFF
, depending on whether you want to use this
function. It allows you to block access to the sender management and the complete
installation menu.
Program Lock Age
:
Use
t
u
to choose between the following settings:
Off
,
12 years
,
14 years
16
years
or
18 years
. As soon as you switch to channels which support child protection
or EPG-based age restrictions, you must enter your PIN-Code according to your
settings.
PIN-Code Change
:
Press
OK
to open the options listed below.
Old PIN-Code
: Use
0 ~ 9
to enter the old PIN-Code.
New PIN-Code
: Use
0 ~ 9
to enter the new PIN-Code.
Confirm new PIN
: Press the
0~9
buttons to confirm your new PIN-Code.
After confirming the new PIN-Code, the menu is closed, otherwise press
to exit.
NOTE:
Parental Control only works on channels which support EPG or EPG based
age restrictions, only then you will be prompted to enter your PIN-Code
(DEFAULT PIN: 0000)
. Otherwise, you can also lock the required channels
as described in the chapter
7.2.1 TV Channel Manager
.
7.3 Settings
Press
MENU
and select
SETTINGS
with
t
u
. The following submenus are available:
Language
,
System Settings
,
Time Settings
,
Timer
, and
STB Information
.
7.3.1 Language
In this menu you can set the preferred languages for the menu, audio and subtitles. Use the
pq
buttons to highlight the desired item and press
t
u
to change the settings.
OSD Language
: Select the desired language, and select
Deutsch
and
English
.
1st Audio Language
:
Set the 1st audio language here. If it is available, the receiver automatically
selects it. On the German-language channels the original language track
might be available and can also be set. In certain cases also acoustic image
descriptions can be selected.
2nd Audio Language
: Set the 2nd audio language here, if the 1st is not available.
