6
14.
P+/P-
Scroll page wise in all lists
15.
INFO
Shows the actual channel information (2x event info, 3x technical
info)
16.
LIST
Opens the satellite list in TV mode. In EPG and Timer mode it opens
the Timer list
17.
EPG
Opens the EPG (Electronic Programme Guide) in TV mode
18.
pq
Menu Off: Change channel to next/previous. Menu On: Moves the
cursor up/down
19.
t
u
Menu Off: Decreases/increases the volume level. Menu On: Change
settings and navigation in menu
20.
OK
Menu Off: Displays the current channel list. Menu On: Opens
the highlighted setting or for confirmation. In Videotext mode:
Changing the transparency in 3 stages
21.
MENU
Opens the main menu; Within the menu switches to TV mode
22.
One step back from each menu or to cancel actions
23.
RED
In menu for specific functions
24.
GREEN
In menu for specific functions
25.
YELLOW
In menu for specific functions
26.
BLUE
In menu for specific functions
27.
u
In Multimedia mode: Starts the playback of a selected file (Preview)
28.
2
In Multimedia mode: To pause the playback of a file
29.
3
In Multimedia mode: Stops the playback of the selected file
30.
5 6
In Multimedia mode: Fast rewind/Fast forward
31.
4
No function
32.
78
In Multimedia mode: During playback to jump to the previous/next
file
33.
No function
* Depending on the System setting
Recent channel list
; allows you to call the channel list with up to 30 recently watched channels
2.5 Inserting the batteries
Fig. 4
NOTE:
The batteries must not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used, we recommend
using (e.g. LSD-NiMH; „ready to use“ and similar) types with low self-
discharge to ensure long time operation of remote control.
2.6 Using the remote control
Fig. 5
NOTE:
The remote control will not operate if its path is blocked or affected by
bright/stroboscopic light.
3.0 CONNECTIONS
3.1 Connection via HDMI or SCART
Fig. 6
Connect the LNB of your satellite antenna to the SAT IN connector of your receiver using a good
quality coaxial cable and suitable ‘F-connector' plugs.
Connect one end of a good quality HDMI cable to the HDMI connector of your receiver and the other
end to the HDMI input of your TV set.
Plug the power adapter jack to the receiver and the other end to a suitable wall outlet.
