18
Recent channel list
Here, you can change the function of the
9
button, by default set
On
, which allows
you to open the
Recently watched channels
list using
9
in TV mode to access up to
30 of the most recently watched channels. If you set
Off
, the button will only change
between the 2 last watched channels.
Deep Standby After
:
This function switches the receiver into a power-saving mode (Deep Sleep) after
switching it off (into standby) within the set time. Available settings are:
5 minutes
,
15 minutes
,
30 minutes
,
1 hour
,
3 hours
and
Off
. The receiver consumes less
power than in standby mode. To power up from deep sleep mode, it takes about 35
seconds.
Auto Standby
: This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are:
1 hour
,
2 hours
,
3
hours
,
4 hours
,
5 hours
,
6 hours
and
Off
. If the receiver has not been operated
during the set time, it automatically switches to standby mode. This is an additional
way to reduce power consumption.
simpliTV List - Update
By default, this option is set to
On
, to ensure that the
simpliTV list
is always up
to date, respectively in case of an available update, a separate message will be
displayed. If you don‘t like to be notified, set this option to
Off
. Please consider, that
this would cause no new channels are automatically added and you need to perform
a new
simpliTV List
channel scan or update the list via
Channel list selection
menu.
7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings
: Select
Auto
to automatically synchronize the time and time zone, or
Manual
to set
the time manually.
Timezone
:
The time zone can be adjusted in manual
Time Settings
.
Summer Time
: This setting is only available when you set the time to
Manual
.
When the winter time is changing to
Summer Time
, it is necessary to switch
Summer Time
to
ON
.
7.3.4 Timer
Use the timer function to switch to a selected programme. Press
OK
to open a timer.
Timer Mode
:
Use
t
u
to select
Once, Monday-Friday, Daily, Weekly or Monthly
, factory setting
is set to
Off
.
Timer Action
:
Switch On
is set here to switch the receiver on at the desired time.
Channel
:
Press
OK
to open the channel list and press
pq
or
P +/-
to select the desired
channel and press
OK
to accept.
Start Date
:
Enter the selected date with
0 ~ 9
.
Start Time
:
Enter the selected starting time with
0 ~ 9
.
End Time
:
Enter the selected end of the recording with
0 ~ 9
.
Standby after timer
:
Set here whether the receiver should always be in standby after the timer has expired
or whether it should always remain switched on.
After finishing all settings, press
pq
to select
Save
and press
OK
.
NOTE:
The setting for
Standby after timer
applies to all timers.
7.3.5 Receiver Information
The menu contains information about the hardware and software versions of the receiver.
Amongst others you will find the serial number, model name, loader version and the CSSN number
of the receiver. The
Device-ID
(Gerätenummer) can be found on the bottom of the receiver, on the
packaging, in the
Client Status
menu or in the technical information (3x
INFO
). If you need to contact
