En
gli
sh
17
format is adjusted so that it is reproduced completely and without distortion (there
are black horizontal bars above and below the picture). When a TV with aspect
ratio 16: 9 is connected, the optimum mode is 16: 9. A video in the 4: 3 format is
reproduced with this setting without distortion (however, there are black vertical bars
on the left and right of playback). A video in the 16: 9 format is displayed without
image adjustment and covers the entire screen. Note that it is also possible to set the
format via the menu of your TV (depending on your TV model).
HDMI Audio Output
:
Here you can set the setting for the digital audio output via HDMI. Press the
t
u
buttons to select between
BitStream
and
PCM
. If a TV set that supports Dolby®
Digital * is connected, use the
BitStream
setting. If this is not the case, use
PCM
.
S/PDIF Audio Output
:
Here you can set the digital audio output via the coaxial S/PDIF. Press the
t
u
buttons to select between
BitStream
and
PCM
. If a home theater, amplifier, or similar
is connected that supports Dolby® Digital *, use the
BitStream
setting. If this is not
the case, use
PCM
.
OSD Transparency
:
You can set the transparency in this menu. You can choose between different values
and
Cover
Banner Time Out
:
Here you can adjust how long the infobanner is displayed.
Recent channel list
Here, you can set the function of the
9
button, factory-set
On
, which allows you to
open the
Recently Viewed Channels
list using
9
in TV mode to access up to 30 of
the most recently viewed channels receive. If you set
Off
, the button will only change
between the 2 most recently viewed channels.
Deep Standby After
:
This function switches the receiver to the power save mode (Deep Sleep) after
switching it off into the standby mode within the set time. Available settings are:
5
minutes
,
15 minutes
,
30 minutes
,
1 hour
,
3 hours
, and
Off
. The receiver consumes
less power than in standby mode. To power up from deep sleep mode, it takes about
45 seconds.
Auto Standby
: This function allows you to set the hours after which the receiver should
automatically switch to standby mode. Available settings are:
1 hour
,
2 hours
,
3
hours
,
4 hours
,
5 hours
,
6 hours
, and
Off
. If the receiver has not been operated
during the set time, it automatically switches to standby mode. This is an additional
way to reduce power consumption.
7.3.3 Time Settings
In this menu, you can adjust settings for the time and date
Time Settings
: Select
Auto
to automatically synchronize the time and time zone, or
Manual
to set
the time manually.
Timezone
:
The time zone can be adjusted in manual
Time Settings
.
Summer Time
: This setting is only available when you set the time to
Manual
.
When the winter time is changing to
Summer Time
, it is necessary to switch
Summer Time
to
ON
.
7.3.4 Timer
Use the timer function to switch to a selected programme. Press
OK
to open a timer.
Timer Mode
:
Use
t
u
to select
Once, {Monday-Friday
,
Daily
,
Weekly
or
Monthly
, factory setting
is set to
Off
.
Timer Action
:
Switch On
is set here to switch the receiver on at the desired time.
Channel
:
Press
OK
to open the channel list and press
pq
or
P +/-
to select the desired
channel and press
OK
to accept.
Start Date
:
Enter the selected date with
0 ~ 9
.