16
New PIN-Code
: Use
0 ~ 9
to enter the new PIN-Code.
Confirm new PIN
:
Press the
0~9
buttons to confirm your new PIN-Code.
After confirming the new PIN-Code, the menu is closed, otherwise press to exit.
NOTE:
Parental Control only works on channels which support EPG or EPG based
age restrictions, only then will you be prompted to enter your PIN-Code
(DEFAULT PIN: 0000)
. Otherwise, you can also lock the required channels
as described in the previous chapter
7.2.1 TV Channel Manager
.
7.3 Settings
Press
MENU
and select
SETTINGS
with
t
u
. The following submenus are available:
Language
,
System Settings
,
Time Settings
,
Timer
, and
STB Information
.
7.3.1 Language
In this menu you can set the preferred languages for the menu, audio and subtitles. Use the
pq
buttons to highlight the desired item and press
t
u
to change the settings.
OSD Language
: Select the desired language, and select
Deutsch
and
English
.
1st Audio Language
:
Set the 1st audio language here. If it is available, the receiver automatically selects it.
On the German-language channels the original language track might be available
and can also be set. In certain cases also acoustic image descriptions can be
selected.
2nd Audio Language
:
Set the 2nd audio language here, if the 1st is not available.
Subtitles Display
:
Select between
On
or
Off
. If
Subtitle Display
is set to
On
, Subtitles will be displayed
automatically in the language selected below (if broadcast/supported by the
operator). If you do not want the receiver to display subtitles, keep the setting
Off
.
Please note that some events are broadcastwd with fixed subtitles (fixed in the video
signal integrated). These subtitles can not be swtiched off.
Subtitle language
:
Set the language for the subtitles, if available, subtitles are displayed in the selected
language.
Volume settings
: Here, you can set whether channels should use a
unite
volume control or if this
should be controlled seperately
Per Service
. Try to find out which setting works best
for you.
NOTE:
Please note that DVB or HoH subtitles are not supported by all service
providers. If available, subtitles can also be accessed via Teletext.
7.3.2 System Settings
In this menu, you can adjust the video parameters according to the connected TV, while general
settings are also available.
HDMI Resolution
:
This allows you to set the resolution for your HDMI output. If your TV does not
support the newly set value, the screen turns black. In this case, wait for about 10
seconds and do not press any buttons on the remote control, then the value will
automatically be reset to the previous one.
Aspect Ratio
: Set the screen format that corresponds to that of the connected TV (4: 3 or 16: 9).
Aspect Conversion
:
Set the image conversion as required.
When a TV is connected with the aspect ratio of 4: 3, the optimal mode is Letterbox.
A video in the 4: 3 format is not adjusted in this mode, but a video in the 16: 9