THOMSON ST2020 Скачать руководство пользователя страница 38 | Manualshive

Страница: 38 / 52

background image

VoIP Business Phone Administrator Manual

Copyright © 2005 THOMSON

-All rights reserved

- Page 38

- Page 38 -

STEP 1:

Run a DHCP server application and configure your server with the following parameters.

-

Option 66: IP address of the DHCP and TFTP server (e.g. 192.168.5.120).

-

Option 132: firmware filename (e.g.: ST2020_fw.bin)

-

Option 133: firmware version (e.g.: 2.0.4.14)

-

Option 134: config filename (e.g.: ST2020_cfg.txt)

-

Option 135: “

customization”

-

Other basic configurations (including IP address range, subnet mask, gateway address, etc.).

STEP 2:

Run your TFTP server software and select the folder containing the upgrade files.

The files should be named as follows.

- Firmware binary file:

ST2020_fw.bin

(Must be the same as the name specified in option 132 of step 1)

- Config filename:

ST2020_cfg.txt

(Must be the same as the name specified in option 134 of step 1)

STEP 3:

Connect the IP phones to the network and then power-up. The individual phones will upgrade

themselves automatically from the APS system and the LCD screen will display the “Configure

Please wait…” message, followed by “Customizing….”.

Once the process is complete, the LCD screen will display “custom OK!” and Green hold LED is

ON. Then, warehouse worker could disconnect the IP phone and put it in the box..

If there is an error during customization, the Red LED will be ON and an error message (e.g. Wrong

FW!, Wrong cfg!, TFTP Error) will be displayed on the LCD screens.

Please refer to the APS Troubleshooting for a more detailed error messages. When the error is fixed,

the customization can be triggered again by power reboot IP phone

STEP 4:

If the customization process fails, the DHCP server setup, network connections or TFTP server setup,

depending on the error message displayed, should be checked.

[Remarks]:

-

If the triggering flag is not “thomson_customization”, the process will fail.

-

The current TFTP folder must contain the files specified in DHCP server options.

-

Ensure that the IP phones are in DHCP mode (the default setting is DHCP enabled).

«
...
36
37
38
39
40
...
»

Содержание ST2020





















































Отзывы:

Нет отзывов

Похожие инструкции для ST2020

Бренд: Neoi Страницы: 40

Бренд: UMX Страницы: 56

Бренд: Mitel Страницы: 2

Бренд: Mircom Страницы: 39

Бренд: Activexpression Страницы: 20

Бренд: Plum Страницы: 21

Бренд: jcb Страницы: 88

Бренд: Samsung Страницы: 110

Бренд: Samsung Страницы: 84

Бренд: Fujitsu Страницы: 79

Бренд: LG Страницы: 24

Бренд: LG Страницы: 46

Бренд: LG Страницы: 36

Бренд: LG Страницы: 98

Бренд: LG Страницы: 396

Бренд: Sony Страницы: 11

Бренд: Zte Страницы: 90

Бренд: RCA Страницы: 27

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды