VoIP Business Phone Administrator Manual
Copyright © 2005 THOMSON
-All rights reserved
- Page 28
Network:
This page allows you to configure the IP address used by the SIP device. The IP address setting
for "static" mode is shown below. In "DHCP" mode, these settings may be overridden by a
DHCP server on your network.
Table 4.3 Network setup page
z
IP address configuration:
selects the static to enter manually the IP address or DHCP
to retrieve the IP address from a DHCP Server. (default setting
Æ
DHCP enabled)
z
Default IP address:
displays the IP address for the IP Phone. (default setting
Æ
0.0.0.0)
z
Default subnet mask:
displays the subnet mask. (default setting
Æ
0.0.0.0)
z
Default gateway
: displays the gateway IP address. (default setting
Æ
0.0.0.0 )
z
DNS Server
: displays the IP address of DNS server. (default setting
Æ
211.157.97.2)
z
NTP Server:
displays the IP address of NTP server. (default setting
Æ
207.46.130.100)
z
Save:
saves the new settings entered into this page.
z
Cancel:
cancels all changes made to settings in this page.
- Page 28 -
Содержание ST2020
Страница 1: ...Administrator Manual ...