THOMSON SpeedTouch 620, Руководство оператора, Страница: 190 / 216

Chapter 11
SpeedTouch™ Advanced Diagnostics
E-DOC-CTC-20051017-0155 v1.0
180
11.3.1 About CLI Diagnostics
Introduction
This section describes some of the diagnostics available from the SpeedTouch™
Command Line Interface (CLI).
For a full description of the CLI commands see the “SpeedTouch™ CLI Reference
Guide” for more information.
Accessing the CLI
You can access the CLI through:
The SpeedTouch™ CLI Web Interface
A Telnet session
The serial Console interface
See “2 SpeedTouch™ Command Line Interface” on page 5 for more information.
Diagnostical CLI
commands
Most CLI command groups feature one or more diagnostical commands. this
chapter provides a brief description of these commands.
For a full description, refer to the “SpeedTouch™ CLI Reference Guide”.
Traces
The following CLI commands feature traces:
adsl config grp config
connection appconfig grp rip config
connection debug hostmgr config
cwmp traceconfig ids config
dhcp client debug traceconfig ip debug traceconfig
dhcp relay debug traceconfig isdn debug traceconfig
dhcp server debug traceconfig label modify
dns client config label rule debug traceconfig
dns server config mlp debug traceconfig
dyndns modify mlp import
firewall debug traceconfig nat config
firewall rule debug traceconfig ppp ifconfig