THOMSON SpeedTouch 620, Руководство оператора

Страница: 162 / 216

Chapter 10
SpeedTouch™ Monitoring
E-DOC-CTC-20051017-0155 v1.0
152
10.2.10 How to Add an SNMP User
About SNMP Users
SNMP Users allow you to determine which MIBs a specific user is allowed to view
or change. This is done by adding a user to a user group. This user group
determines the user’s access to the MIBs.
Limiting MIB Access
You can limit the MIBs visible within a defined Read-Only (RO) or Read/Write (RW)
Community. To do so, you need to do the following:
Define the view with the MIBs you want visible
Define a group to determine the read/write/notify access
Define a user and add the user to the group, giving that user access to that
view
Users and Communities
The use of Users, Views and Groups is defined in SNMPv3. SNMP v1 and SNMPv2
however, use communities . In SNMPv1, “users” are represented as communities.
Therefore, they are not visible with the
:snmp user list
command. However,
you can still view them using the :snmp securitytogroup list command.
SNMP User Groups
There are 7 pre-defined user groups available for SNMP. These levels exist in the
MLP structure. However, since SNMP does not need this many groups, some of
them have the same default access rights. Below is an overview:
Group Description
User This group has read access to the following subtrees:
1.3.6.1.2.1.1 System
1.3.6.1.2.1.11 SNMP
1.3.6.1.6.3.10.2.1 SNMP Engine
1.3.6.1.6.3.11.2.1 SNMP MD Stats
1.3.6.1.6.3.15.1.1 Stats
This group has no CLI access.