THOMSON SpeedTouch 620, Руководство оператора

Страница: 18 / 216

Chapter 2
SpeedTouch™ Command Line Interface
E-DOC-CTC-20051017-0155 v1.0
8
Help
You can use help or ? from any level to list all available commands and command
groups for that level. Below an example is provided of executing help from the
firewall command group selection:
Entering
help
followed by a specific command, for example
:help firewall
list (starting from top level) or help list (entered from within the firewall
command group selection) results in a description of the syntax for the command:
Executing
:help all
from top level will generate the complete listing of all
available CLI commands (including syntax description). If entered from within a CLI
command group, the listing of all available CLI commands from that CLI command
group (including syntax description) are shown.
Command completion
The CLI features command completion, which means that when starting to type a
command it can be completed by pressing TAB.
For the completion to be successful, the part already typed has to be unique.
Completion works for the command groups, for the commands and the options, but
not for values.
For example, typing the letter l at the firewall command group selection, followed
by pressing TAB results in the full command being completed. Entering firewall
l
from top level and pressing TAB gives the same result: the command is
completed to firewall list .
Going to the beginning
or end of a line
You can move the cursor to the beginning of the command line by pressing
"CTRL+A"; to move the cursor to the end of the Command Line press "CTRL+E".
Breaking off commands
You can break off a command by pressing "CTRL+G". This can be useful in a
situation where a user wants to abort the command. This can be useful to break off
commands for which the user does not know the value of a required command
parameter.
=> :firewall help
Following commands are available :
config : Display/Modify firewall configuration.
list : Display firewall configuration.
flush : Flush firewall configuration.
Following command groups are available :
chain debug level rule
Executing
:help firewall
from top level gives the same result.
=> :help firewall list
Display firewall configuration.
Syntax : list [format = <{pretty|cli}>]
Parameters :
[format = <{pretty|cli}>]
The format of the firewall list.