THOMSON SPEED TOUCH 580, Инструкция по установке и настройке

Страница: 41 / 44

Chapter 5
Internet Connection Troubleshooting
E-DOC-CTC-20050429-0061 v1.0
35
5.5 Wireless Setup Troubleshooting
Restoring Windows
Zero Configuration
When installing a SpeedTouch™110g/120g/121g, the SpeedTouch™ Client Manager
will be installed. The SpeedTouch™ Client Manager is an alternative to the Windows
Zero Configuration (WZC) in Windows XP. In many cases the SpeedTouch™ Client
Manager will disable the WZC.
For information about starting the WZC service, visit the Microsoft knowledge base
on
http://support.microsoft.com .
Uninstalling the
SpeedTouch™ Wireless
Client Manager
Every time you reconnect to a WLAN the SpeedTouch™ Wireless Client Manager will
start itself up again though, forcing the WZC to go down.
Therefore, you might want to uninstall the SpeedTouch™ Wireless Client Manager.
Proceed as follows:
1
In the Windows XP task bar, click the
Start
button
2
Select
(All) Programs > SpeedTouch 110g/120g/121g Wireless Monitor >
Uninstall SpeedTouch 110g/120g/121g Wireless Monitor
.
3
The Uninstall wizard will start running. Click
OK
to confirm you want to
uninstall.
4
The Install Shield Wizard will appear and will notify the SpeedTouch ST110g/
120g/121g Monitor is successfully unistalled. Click
Finish
to close the wizard.
5
After uninstalling the SpeedTouch™ Wireless Client Manager, you can restore
the WZC.
You need administrative privileges on your computer to restore the WZC
service.