THOMSON SPEED TOUCH 580, Инструкция по установке и настройке

Страница: 14 / 44

Chapter 2
Basic Installation
E-DOC-CTC-20050429-0061 v1.0
8
Powering the
SpeedTouch™
To power on the SpeedTouch™, press the power button on the SpeedTouch™ rear
panel.
During the start-up procedure, the power LED on the front panel is lit red for some
seconds. As soon as the power LED is solidly lit green, your SpeedTouch™ is ready
for service. After another couple of seconds, also the DSL LED will light green.
If these LEDs do not light, please refer to
”Checking the LEDs” on page 29 . A
comprehensive LED overview can be found in the SpeedTouch™ User’s Guide.
To power off your SpeedTouch™, press the same button.