THOMSON SPEED TOUCH 580, Инструкция по установке и настройке

Страница: 20 / 44

Chapter 3
Internet Access in No Time
E-DOC-CTC-20050429-0061 v1.0
14
Configuring the
SpeedTouch™ (and your
computer)
Once the hardware is installed successfully and you are connected to the
SpeedTouch™, the wizard will continue with the configuration of your SpeedTouch™.
Proceed as follows:
1
If prompted, enter the
User name
and
Password
for your SpeedTouch™
security settings and click
OK
.
2
Select the appropriate
Region
,
Provider
and
Service
for your Internet
connection as specified by your service provider and click
Next.
3
Select the
VPI/VCI
- and, if required, the
Connection Type
- as specified by
your service provider and click
Next
.
4
Enter the
User Name
and
Password
for your Internet account settings as
specified by your service provider and click
Next
.
The factory default user is ‘Administrator’. Its password is blank,
meaning you do not have to enter anything in the password field. It is
advisable to specify another user name and password to protect your
SpeedTouch™ from security violation during the configuration
procedure (see
“ Access Control” on page 15 ), or as described in
“3.4 Basic Security” on page 24 .
If the service provider has included a separate disk with a dedicated
service profile, click
Have Disk...
to browse to the location of the
appropriate service profile template file.
!
From here on the procedure might differ from the description below.
The requested information will depend on the selected service profile
and should be provided by your Service Provider. Subsequent screens
will guide you through the configuration setup of both the
SpeedTouch™ and your computer. Enter the requested information and
click
Next
whenever requested.