GB
GB
15
Use
J
J
NO TIMER AVAILABLE.
You need to free one of the memories in order to programme again.
J
J
When you programme 2 or more recordings with overlapping time periods, the menu Timer review
comes up along with an error message (the programmed recordings are flashing).
Delete the programmed recordings with key 0000 (
21
).
Error messages likely to occur when programming
Storage of the programme numbers with the ShowView feature
J
J
When the video recorder is on standby, waiting for the time at which the recording shall be
triggered, a special indication (
) is to be seen on its display. Then you can't operate the video
recorder any longer unless you quit this mode by pressing key
B
(
3
).
When the video recorder is programmed
1
Display the
SUMMARY
menu with key MENU (
15
), select Timer with key
W
W
(
12
) and
confirm with OK (
10
).
2
Select the Timer review line with key
W
(
12
) and confirm with OK (
10
).
3
With keys
W
(
12
) and
V
(
9
) select the programming to be deleted.
Press key 0000 (
21
).
ð
The programming is now deleted.
Deleting a programmed recording
J
J
The recording of a programme can be triggered by a satellite receiver or any other unit supporting
this feature and connected to socket AV1 or AV2 by means of a SCART cable. This connection
scheme prevents you from having to programme both units.
1a
Programming by
EXTERNAL TIMER
: tick off the External timer box in the menu
PREFERENCES
(page 19) to trigger the recording via socket AV1.
1b
Programming by the menu
RECORD TIMER
: programme the connected unit and, in the
video recorder
RECORD TIMER
menu, only select either socket AV1 or AV2.
2
Switch the video recorder to standby with key
B
(
3
).
Recording programmed by a connected external unit
ShowView is a registered trademark of Gemstar Development Corporation.
The ShowView system is manufactured under licence from Gemstar Development Corporation.
J
J
J
J
To spare yourself from having to enter the corresponding programme number in addition to the
ShowView code, the video recorder automatically stores the numbers of the channels you have
chosen to record with the ShowView feature.
This is to say that on your FIRST selection of a channel (Pr- - or SA- -) to programme a recording
with the ShowView feature, the video recorder will prompt you to confirm or enter the channel
number. When programming your next ShowView recording, the video recorder will automatically
identify the channel concerned.
