6
Set-up
IN
OUT
M
odulator
J
J
If your television set is not fitted with a SCART socket
(i.e. the television is connected to the video recorder via
the aerial sockets IN/OUT or
g
g
), you will have to
make the settings of the video recorder modulator and
then, on the television, assign a channel number to the
video recorder.
1
Switch the video recorder on by pressing key
B
B
(ON) on its front side.
2
Press key VCR (
1
) on the remote control.
3
Hold down key MENU (
15
) on the remote control until SY 1, 2 or 3 comes up on the
video recorder display.
4
Press key
B
B
(
11
) to select the TV standard of your country.
SY 1: Standard L (France
SY 2: Standard BG (Western Europe)
SY 3: Standard DK (Eastern Europe)
5
Validate your choice with the OK (
10
) key.
ð
Please wait: the video recorder is searching for a channel, within the range 21 to 69,
available for transmitting its pictures to the television via the coaxial cable. After a
while, the video recorder display indicates the channel that will be used for this
purpose. Note down the number here
.
6
Continue with the steps below.
Settings to be made on the video recorder (modulator)
J
J
Take the user manual of your television and carry out the steps below.
7
Switch on your television set.
8
Select an available channel number (a channel which has no picture).
9
Follow the instructions of your television user manual to find the video channel of the
video recorder (the one you noted down above).
ð
Once the television has found the video channel of the video recorder, the following
message will be displayed on the screen (VCR,
C
C
CH 60
B
B
).
J
J
If the picture is poor (snowy, torn), change the communication channel of the video
recorder with keys
C
C
/
B
B
(
11
/
13
).
10
Store channel and its number on the television set.
J
J
From now on, to watch the video recorder pictures or menus, you'll have to switch on the
television on the channel assigned to the video recorder, i.e. the channel number chosen in
step 8.
11
Press the OK (
10
) key.
12
Go back to page 4 and resume automatic channel set-up starting with step 4.
Settings to be made on the television
(video channel number)
The sound from a TV channel or a cassette transmitted via the coaxial cable is monophonic. To
make the television reproduce stereo sound, you must use a SCART cable.
J
J
