THOMSON Grass Valley ParkerVision Camera Man Скачать руководство пользователя страница 28

Страница: 28 / 35

Page 25

Front of CameraMan Camera

Appendix B: Troubleshooting

Problem: The CameraMan autoTRACK Camera will not follow the Tracking

Ring Package.

Solution: 1. Is the

POWER

LED on the CameraMan’s front panel illuminated?

• If it is illuminated, proceed to step #2.
• If it is not illuminated, make sure the Main Docking Station is

plugged in and its POWER switch located on the front panel is

moved to the ON position. The POWER LED on the front of the

Main Docking Station should be illuminated.

2. Is the

TRACKING UNIT STATUS

LED on the camera’s front panel

illuminated?

• If it is

, proceed to step #3.

• If it is

OFF

, make sure the Tracking Ring Power Pack is powered

ON.

• If it is still OFF, check the

Battery LOW LED

on the top of the

Tracking Ring Power Pack. If the Battery LOW LED is illuminated,

then the battery is low and needs to be recharged.

• If both the ON LED and the LOW LED on the top of the Power

Pack are not illuminated, then the battery may be completely

discharged and needs to be fully recharged.

• If the battery is fully charged and the TRACKING UNIT STATUS LED

is still OFF, check that the

RF CHANNEL switch

on the back of

the Main Docking Station matches the position of the RF Channel

switch on the back of the Tracking Ring Power Pack.

3. Is the autoTRACK LED on the camera’s display panel illuminated or

flashing?

• If it is ON, proceed to step #4.
• If it is OFF, use the Tracking System Keypad to select one of the

four autoTRACK View buttons.

4. If the POWER and the TRACKING UNIT STATUS LEDs are illuminated,

and the autoTRACK LED is blinking,

• Check to make sure that the

Tracking Ring Sensors

are attached

properly and are not covered by hair or clothing.

• Be sure that you are standing in the field-of-view of the camera.

Should you have any problems with your CameraMan Presenter Camera System, please refer to the following guide. After referring

to the guide, should you still have questions, please contact your authorized ParkerVision reseller, or call ParkerVision Product

Support direct at (800) 532-8034 or (904) 737-1367.

Step 1:

Is POWER LED

ON?

Step 2:

Is TRACKING

UNIT STATUS

LED ON?

Step 3:

Is autoTRACK LED

flashing?

Power ON?

Battery Charged?

RF Switch set to

the same

channel?

Содержание Grass Valley ParkerVision Camera Man




































Результаты поиска

Содержание Grass Valley ParkerVision Camera Man

Отзывы:

Бренды по названию

Популярные бренды

THOMSON Grass Valley ParkerVision Camera Man, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Grass Valley ParkerVision Camera Man

Отзывы:

Бренды по названию

Популярные бренды