Page 19
© 2001 ParkerVision, Inc. • Meet Your 3-CCD Presenter Camera System
...press the DOWN arrow to lower the
camera, and raise the subject’s position.
Manual Pan/Tilt Arrows
Press the up, down, right, or left
PAN/TILT
arrows to pan or tilt the autoTRACK camera
in that direction.
By pressing any of the
PAN/TILT
arrows in the Camera Control section of the
Tracking System Keypad, you will disengage the autoTRACK mode.
To reactivate the autoTRACK mode, press any of the four
autoTRACK View
buttons. This will engage the autoFIND mode. When the presenter is in the field-of-
view, CameraMan locks onto line-of-sight tracking in the view selected.
Using the Subject Position and Pan/Tilt Arrows
If the subject appears too low
in the frame...
...press the LEFT arrow to
move the subject’s position.
If the subject appears too far
to the right in the frame...
Subject Position Arrows
In the autoTRACK mode, press any one of the four directional
Subject Position
arrows to
adjust your location in the current
autoTRACK View
. Pressing the up, down, right or left
arrows changes the subject's position in the video frame.
Manual Pan/
Tilt arrows
This section is dependent upon the orientation of your panning arrows. We have used the default orientation for the examples.
Subject
Position
arrows
