
R
Re
ecco
orrd
de
err FFu
un
nccttiio
on
nss
19
Using Y
o
ur
D
T
R
N
Nu
um
meerriicc cch
ha
an
nn
neell een
nttrryy
Channels are ordered in a preset list this is called the Logical
Channel Number (LCN). Once you have been using your recorder for
a little while you will remember the LCN associated with a
particular channel. You can enter the LCN directly with the numeric
buttons on your remote control. You will need to enter all three
digits of the LCN.
S
Sttrreea
am
m ssw
wa
ap
p
Your DTR has two tuners which means it can receive two different channels at the same time.
You can switch between these two channels by pressing 0
0 on your remote control. If that
channel is paused, it will automatically switch to play to allow you to watch the programme.
Furthermore, if you are watching a recorded programme, your DTR will pause that programme
and switch to the programme currently being received by one of the tuners. Pressing 0
0 again
will switch to the other tuner and pressing 0
0 again will return you to your recorded programme
and resume playback.
IIn
nsstta
an
ntt rreecco
orrd
d
If while watching a programme you decide you wish to record it, press the R
RE
EC
CO
OR
RD
D button on
your remote control. Your DTR will automatically record the programme to the end of the
scheduled time and add any of that programme that exists in your review buffer.
C
Ch
ha
assee p
plla
ayy vviieew
wiin
ng
g
This is the ability to view a programme that is currently being recorded as part of a scheduled
record or an instant record process. There are two ways to view a programme while it is being
recorded. From P
Plla
an
nn
need
d R
Reecco
orrd
diin
ng
gss highlight the programme you wish to watch and press the
R
RE
ED
D button on your remote control. This will start the programme from the beginning. You can
also change channels to the one that is recording your programme and use trick modes such
as REWIND to move back through the recording to your desired point.
TTrriicckk m
mo
od
deess
These are functions that enable you to move forward or rewind
through a recording. There a nine incremental speeds for both
forward and rewind, these are ¼, ½, x1, x2, x4, x8, x16, x32 & x64.
Press the forward or rewind button on your remote control to enter
the trick mode. Repeated presses of that button will increase the
speed. To reduce the speed press the opposite button.
Note: That quarter and half speed modes are only accessed from pause mode. To enter pause
mode, press the Pause button on your remote control. Also, while in pause mode, you can press
the pause button again to advance one frame. Continued pressing will advance frame by frame.