Recording
14
EN
VCR
Programming a recording
Programming a recording can be done up to one month in advance with up to seven recordings being
pre-programmed. Ensure the television channels have been tuned and stored correctly and that the
clock is set to the correct time.
Programming a recording using the S
HOW
V
IEW
® numbers
Each television broadcast has its own S
HOW
V
IEW
number guide which can be found in your TV
magazine.To programme the recording of a broadcast, all that is required is for you to enter this
number in the
S
HOW
V
IEW
menu; it contains the date, start and end time and the number of the
channel broadcasting the programme.
S
HOW
V
IEW
is a registered trademark of Gemstar Development Corporation. The S
HOW
V
IEW
system is
manufactured under licence from Gemstar Development Corporation.
1.
Press the
VCR
button and then the
TIMER
button to access the
S
HOW
V
IEW
menu.
2.
Select the the frequency of the recording using the
and buttons:
ONCE
(recording of a single
programme),
DAILY
(daily recording from Monday to
Friday) or
WEEKLY
(recording of a weekly
programme).
3.
Use the number buttons to enter the S
HOW
V
IEW
number of the broadcast you want to record.
Note: If you make a mistake, press
then enter the correct
number.
4.
Press
OK
.
The data corresponding to the entered S
HOW
V
IEW
number are displayed.
• If
PLEASE CHECK
appears, check the number and re-
enter it.
• If
- -
appears, enter the programme number of the
channel. It will automatically be stored in the internal
S
HOW
V
IEW
channel map.
5.
To change one of the settings, select it using the
and
buttons.Then press
and
to enter the
correct information.
6.
Press the
button to select the VPS/PDC function and activate or deactivate it using
and
.
Note: Some channels telecast their programmes with VPS (Video Programme System) or PDC (Programme
Delivery Control) signals.These signals detected by the video recorder allow accurate triggering and stopping
of a recording, whatever the delay of the programmes.
7.
Press
to select the recording speed. Use the
and
buttons to scroll options: Standard
Play (
SP
), Intelligent Play (
IP
) and Long Play (
LP
).
Notes:
The IP feature adjusts the recording speed to quantity of video tape left. It switches speed from SP to LP if
there is not enough tape left to record the whole programme in SP mode.
The IP feature is not available when VPS/PDC is on.
UNA VEZ
OK
i
0~9,
SHOWVIEW NO.
- - - - - - - -
-
REC
PR
DATE
TIME
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- -
- -
SP
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
- - - - - - - -
~
:
:
10
CH4
12
SP
11 11 55
~
:
:
i
DTH6300F_EN 28/05/04 15:41 Page 14
