Basic playback operations
12
EN
VCR
Fast Forward / Rewind
Press
STOP
then press either
REV
for rewind or
FWD
for fast forward.
Whilst you are rewinding or fast forwarding you can view the section you are passing. Press and
hold (for a few seconds) either
REV
or
FWD
. Releasing the button will return the video recorder
to normal rewind or fast forward operation.
Variable playback
Use the
and
buttons to adjust playback speed during playback or for freeze frame. Below is a
list of available speeds:
To resume normal playback, press
PLAY
.
Note: During slow motion, noise bars may appear on the picture according to the status of tape. If distortions
can be seen in the picture, reduce them with the
and
buttons.
Still image
Press the
PAUSE
button for freeze frame.This picture may display some interference in the form
of black and white horizontal lines.This is perfectly normal and does not mean that the video tape
is damaged.
Notes:
Freeze frame cannot exceed five minutes. After five minutes, the video recorder automatically stops.
You can use the
and
buttons to reduce any vertical movement seen on the still picture.
Frame Advance
1.
Press
PAUSE
repeatedly to advance forward image by image.
Note:You can use the
and
buttons to reduce any vertical movement seen on the still picture.
2.
Press
PLAY
to return to playback.
Ejecting the tape
Press
OPEN.CLOSE
on the remote control or
EJECT
on the front panel to eject the tape.
Note: If the end of the tape is reached, the video recorder automatically stops, rewinds, ejects the tape and
goes into standby mode.
x 1 = slow motion
x 5 = reverse playback 7x speed
x 2 = freeze frame
x 1 = playback 2x speed
x 3 = reverse playback
x 2 = playback 7x speed.
x 4 = reverse playback 3x speed
DTH6300F_EN 28/05/04 15:41 Page 12
