Thomashilfen A-Chassis Advantage, Инструкция по эксплуатации

Страница: 24 / 32

2021-04
Adjustment of the seat tilt
Caution: When adjusting the seat tilt, always hold the back of the rehab stroller to avoid jerky changes in position for the
child. We recommend that you make these adjustments without the child in the seat unit. When making adjustments
with the child in the seat, the child must always be held / secured by a second person.
Actuate the release lever on the back of the seat unit and swivel the seat to the desired seat tilt (Fig. 6). When you let go
of the release lever, the seat unit engages into the closest hole in the hole matrix.
Caution: Always ensure that the locking pins on both sides of the seat unit are engaged firmly in place in a hole in the
hole matrix.
Caution: During day-to-day use, ensure that the release lever always remains unobstructed and is not accidentally
triggered / pulled (due to counterpressure / contact with other objects). Otherwise, there is an increased risk of tilting /
injury for the child.
note: In the “Crash” version of the A-Chassis Advantage, an additional locking pin for limiting the active sitting position
(-10°) is mounted on the side. It is indicated by a “0°” label (Fig. 5+21)
This locking pin prevents the active sitting position from being set unintentionally. If the active seating position is to be
used, the pin must be pulled out during tilting. If the seat is moved out of the active seating position, the pin automati-
cally reinserts itself again.
Suspension
The suspension is always active. It is for suitable for any body weight up to the maximum load capacity of the seat unit
and does not have to be adjusted to the child’s weight.
Basket
The basket is positioned under the rolling chassis. It is used to carry important parts needed when on the go (please
note the maximum load capacity).
The basket has snap hooks on both sides at the front. At the rear, it is fastened to the chassis with a zipper. Guide the
basket into the chassis from the rear. Place the fastening strap at the rear end of the basket around the crossbar of the
rear frame (Fig. 18) and fasten the basket with the zipper (Fig. 19). Then insert the basket’s snap hooks into each of the
large openings on the front end of the chassis’ side (Fig. 20).
The basket can be left in place when folding the chassis. However, if the chassis is kept folded over a longer period, we
recommend removing the basket beforehand to avoid warping of the bottom plate.
Use as a seat in a motor vehicle
In combination with the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, the “Crash” version of the
A-Chassis Advantage has successfully passed the crash test according to the international ISO 7176/19 standard as well
as ANSI/RESNA WC-4: Section 19 and can be used as a seat in a motor vehicle.
Important: If the A-chassis Advantage is to be used together with the EASyS Advantage / EASyS Advantage S / EASyS
Modular S seat unit as a seat in a motor vehicle, the following instructions are to be heeded.
Together with the A-chassis Advantage, the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit has
been designed for transport in the forward direction. Whenever possible, the user should be placed on one of the vehi-
cle seats and the installed restraint system should be used.
Use only chassis / passenger restraint systems that are in accordance with ISO 10542 to secure the A-chassis Advantage,
together with the EASyS Advantage / EASyS Advantage S / EASyS Modular S seat unit, to the floor of the vehicle.
The 4 attachment points on the A-chassis Advantage are indicated by the following symbol:
Note regarding safety: If the rehab stroller is used as a seat in a motor vehicle, the locking pin on the side of the chassis
must be engaged; this is also indicated by the symbol above (Fig. 21). In this way, the seat angle is locked in a reclined
position.
Instructions for Use – A-Chassis Advantage
24