Thomashilfen A-Chassis Advantage, Инструкция по эксплуатации

Страница: 22 / 32

2021-04
Putting into Service
• Carefully remove the transport protection and the packaging.
• Keep the packaging material and small parts out of the reach of children to prevent swallowing or choking.
• The product is delivered folded. Note the remarks for folding found in the section on adjustment options.
Using the release lever, the seat can be removed from the A-Chassis Advantage without tools. It is important that the re-
lease lever remains actuated while inserting and removing the seat unit. No tools are required when using the seat unit
and the chassis for the first time, except for the Allen wrench that is supplied with the seat unit.
Teaching the User
The user is taught how to use this device by trained staff who will reference these Instructions for Use.
Adjustment Options / Features
The settings / adjustments must always be made by trained / instructed professionals (such as medical product consult-
ants of specialist medical dealers).
Seat unit
Inserting the seat unit
Activate the release lever on the backrest and insert the seat unit into the chassis from above (Fig. 6). Make sure that the
buttons on the sides of the seat unit between the folding joint and the connecting strap of the rear frame and the sliding
support are properly threaded through (Fig. 7). Now guide the buttons on the sides of the seat unit into the receiving
slots on the sides of the chassis (Fig. 8) and let the seat unit slide into position (Fig. 9). When you release the trigger, the
seat unit engages into the closest position of the hole matrix.
Caution: Always ensure that the locking pins on both sides of the seat unit engage firmly into a hole in the hole matrix.
Removing the seat unit
To remove the seat unit, actuate the release lever and pull the seat unit upwards out of the frame (Fig. 6). Make sure that
the buttons on the sides of the seat unit between the folding joint and the connecting strap of the rear frame and the
sliding support are properly threaded through (Fig. 7).
Folding
Folding open
Unlock the lock for folding. To do this, pull out the red locking pin on the right side of the chassis and rotate it by 90°
(Fig. 10). Take the rehab stroller by the push handle and pull it upwards while placing your foot on the rear axle (pull
until the push handle engages with a click). Then place the backrest in the upright position (release the clamping lever
at the back of the seat unit; Fig. 11). The footrest must be fastened to the knee joints. To do this, align the ratchet joints
and fasten them to the screws (from the inside), the saddles (from the outside) and the eccentric levers (from the outside;
Fig. 12).
Instructions for Use – A-Chassis Advantage
22