Malfunctions – if a problem occurs
Problems / malfunctions
Reason / remedy
The appliance will not start
• Are the power cord, plug and socket intact?
• Before checking, unplug the power cord; have all repairs carried
out by authorised specialists
• Is the appliance switched on?
➔
Check
Dust comes out of the appliance
during vacuuming
• Are the dustbag,
Blue CleanAir
filter and motor protection filter
installed as specified in the user manual?
➔
Check
Suction power gradually decreases
• Is the
Blue CleanAir
filter clogged?
➔
Clean or replace
the
Blue CleanAir
filter
• Are the nozzles, suction pipe or hoses blocked by coarse dirt?
➔
Stretch the hose during operation to loosen the blockage;
remove the blockage
• Is the housing cover properly shut?
➔
Check
Suction power is too low
• Is the filter bag full?
➔
Insert a new filter bag
• Is the
Blue CleanAir
filter clogged?
➔
Clean or replace
the
Blue CleanAir
filter
• Are the nozzles, suction pipe or hoses blocked by coarse dirt?
➔
Disassemble and clean
• Is the electronic suction power control set to MIN?
➔
Set the suction power to MAX
• Is the mechanical suction power control on the handle open?
➔
Close the sliding button on the handle
GB
19
