- Version du 04/06/2020 -
Center palte assembly :
To change the centre plate, loosen the three nuts on the motor lid. Lift the engine-lid-axle
assembly. Unscrew the nut (b) under the extractor.
Replace the damaged parts and reassemble the whole unit. Make sure you do not forget
the ball (e) and to grease it with Vaseline or food grade grease.
Be careful to tighten the screw (a) in the right position with a hexagonal wrench.
6512 Radianox Extractor: User’s Guide
8/9
(a)
Screw
(b)
Nut
(c)
Bottom
gasket
(d)
Center plate
(e)
marble
(g)
Ball bearing
(f)
Upper
gasket
Exterior parts
Interior parts
