- Version du 04/06/2020 -
Usage guide
Manual version (Ref. 10580)
Extraction :
Open the transparent lid.
Place the uncapped frames vertically in the cage, taking care to balance the load, and
putting the heels outwards.
Close the lid.
Start the extraction by turning the crank at low speed and accelerate as the frames are
emptied and lighten.
Wait for the cage to stop completely.
Collect the extracted frames.
Important :
Extraction must be carried out with the tap open to prevent honey from
accumulating in the extractor. The honey is collected in a container under the tap.
Electric version (Ref. 10619)
Extraction :
Connect to the electrical supply.
Open the transparent lid.
Place the uncapped frames vertically in the cage, taking care to balance the load, and
putting the heels outwards.
Close the lid. The "click" of the safety device must be audible when closing (and opening)
the lid.
Press the ON/OFF switch (8).
Turn the speed variator in slow gear (medium for tangential extraction) in the chosen
direction et wait a couple minutes before raising the speed.
Once the extraction is completed, put the lever (9) back to 0 and wait for the complete
stop of the cage.
Press the ON/OFF switch to stop the machine.
Collect the extracted frames
NOTE: opening the lid during the cycle stops the motor/
Important :
The extraction must be done avec the tap open to avoid honey accumulation
inside the extractor. The honey pours into a receiver underneath the tap.
6512 Radianox Extractor: User’s Guide
6/9
