thomann Stairville BS-280 R10 BeamSpot, Руководство пользователя

Страница: 7 / 40

WARNING!
Eye damage caused by high light intensity
The lamp used in this device produces an intense beam of visible and
invisible light radiation.
Do not start the operation of the device without completely fixed
covers. Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive
persons should avoid looking at strobe lights.
WARNING!
Risk of burns at the surface and inside of the device
The surface and the inner parts of the device can become very hot
during operation.
After switching off the device wait for at least 15 minutes before you
start any maintenance activities.
CAUTION!
Risk of injury due to movements of the device
The head of the device can move quickly (pan, tilt) and can produce
very bright light. This is also valid immediately after you turn on the
device, when the device operates in automatic mode or under remote
control and when you turn off a DMX controller that is connected to the
device. Persons staying near the device could be injured or frightened.
Before you turn on the device and during the operation, always ensure
that nobody stays close to the device. If work has to be performed in the
area of movement or in the near vicinity of the device, it must remain
turned off.
NOTICE!
Risk of fire
Do not block areas of ventilation. Do not install the device near any
direct heat source. Keep the device away from naked flames.
Safety instructions
BS-280 R10 BeamSpot
7