thomann Stairville BS-280 R10 BeamSpot, Руководство пользователя

Страница: 17 / 40

Press [MENU] repeatedly until the display shows ‘DMX State’ . Use and to now
select between ‘Hold’ (continues the last operating mode) and ‘Blackout’ .
If the display shows the required value, press [ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
Press [MENU] repeatedly until the display shows ‘Pan Inverse’ . Use and to now
select between ‘no’ (normal direction of rotation) and ‘Yes’ (reverse direction of rota‐
tion).
If the display shows the required value, press
[ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
Press [MENU] repeatedly until the display shows ‘Tilt Inverse’ . Use and to now
select between ‘no’ (normal direction of tilt) and ‘Yes’ (reverse direction of tilt).
If the display shows the required value, press [ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
Press [MENU] repeatedly until the display shows ‘LCD Display’ . Use and to now
choose between ‘on’ (LED for background illumination of the display is switched on)
and
‘oFF’
(LED for background illumination of the display is switched off).
If the display shows the required value, press
[ENTER]
and then
[MENU]
. To return to
the main menu without making changes, wait around 30 seconds.
Press [MENU] repeatedly until the display shows ‘Auto Test’ . Press [ENTER] . The device
now performs a self-test.
To abort the self-test and to return to the main menu, press
‘MENU’ .
Press [MENU] repeatedly until the display shows ‘Fixture Time’ . Press [ENTER] . The dis‐
play shows how long the device has been already in operation.
Press
[MENU] to close the operating hours counter.
Press [MENU] repeatedly until the display shows ‘Lamp on/off’ . Press [ENTER] . Use
and to now select between ‘on’ (lamp switched on) and ‘oFF’ (lamp switched off).
If the display shows the required value, press [ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
This function allows you to define the device's behaviour immediately after switch-
on.
Press
[MENU] repeatedly until the display shows ‘Lamp Power on’ . Press [ENTER] . Use
and to now select between ‘PooF’ (lamp initially remains dark after the device is
switched on) and ‘PooN’ (lamp lights up immediately after the device is switched
on).
If the display shows the required value, press
[ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
Blackout function
Pan reversal
Tilt reversal
Background lighting
Self-test
Operating hours display
Switching the lamp on and off man‐
ually
Quick start
Operating
BS-280 R10 BeamSpot
17