thomann Stairville BS-280 R10 BeamSpot, Руководство пользователя

Страница: 31 / 40

8 Maintenance
8.1 Installing / replacing the light source
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present.
Completely disconnect the device from the power supply before you
open or remove covers. Mount all covers and attach them firmly before
connecting the device again.
Do not use the device if covers, protectors or optical components are
missing or damaged.
WARNING!
Eye damage caused by high light intensity
The lamp used in this device produces an intense beam of visible and
invisible light radiation.
Do not start the operation of the device without completely fixed
covers. Never look directly into the light source.
WARNING!
Risk of burns at the surface and inside of the device
The surface and the inner parts of the device can become very hot
during operation.
After switching off the device wait for at least 15 minutes before you
start any maintenance activities.
NOTICE!
Possible damages due to dirt or finger prints
Due to the high temperatures, even smallest pieces of dirt on the bulb
can destroy the lamp when it is turned on.
Do not touch the lamp directly with your fingers. Use clean gloves or a
clean lint-free tissue.
NOTICE!
Possible damages due to wrong type of lamp
Any attempt to use the device with a lamp other than those specified in
this manual can result in severe damages to the device.
Only use a lamp of the specified type.
Maintenance
BS-280 R10 BeamSpot
31