thomann Stairville BS-280 R10 BeamSpot, Руководство пользователя

Страница: 18 / 40

Press [MENU] repeatedly until the display shows ‘Firmware Version’ . Press [ENTER] .
The display shows the device’s firmware version.
Press
[MENU] to close the display of the firmware version.
Press [MENU] repeatedly until the display shows ‘Default’ . Use and to now select
between ‘no’ (no action) and ‘Yes’ (reset all values to factory defaults).
If the display shows the required value, press [ENTER] and then [MENU] . To return to
the main menu without making changes, wait around 30 seconds.
Press [MENU] repeatedly until the display shows ‘Reset’ . Press [ENTER] . The device is
reset to its default settings.
7.3 Calibration
The starting position of all mechanically powered elements can be adjusted in fine
increments. To open the calibration menu, press [MENU] and then press [ENTER] for
three seconds. Then using and , select the element you wish to calibrate. Press
[ENTER] . Use and to adjust the selected element. Once the display shows the
required value, press [ENTER] .
The following table shows the possible settings.
Display Element Value range
from to
‘Pan Offset’ Rotation (pan) -127 127
‘Tilt Offset’ Inclination (tilt) -127 127
‘Dimmer Offset’ Mechanical dimmer 0 255
‘Color Offset’ Colour wheel -127 127
‘Gobo1 Offset’ Gobo wheel 1 -127 127
‘Gobo2 Offset’ Gobo wheel 2 -127 127
‘RGobo Offset’ Rotation of the gobos in gobo wheel 2 -127 127
‘Prism1 Offset’ Prism wheel 1 0 255
‘RPrism1 Offset’ Rotation of the prisms in prism wheel 1 -127 127
‘Prism2 Offset’ Prism wheel 2 0 255
‘RPrism2 Offset’ Rotation of the prisms in prism wheel 2 -127 127
‘Frost Offset’ Frost filter 0 255
‘Zoom Offset’ Mechanical zoom 0 255
‘Focus Offset’ Mechanical focus 0 255
Firmware version
Loading default settings
System reset
Operating
moving head
18